Humidity for Military Storage

Find your Condair expert

Benefits

Maintaining the right humidity levels is vital for protecting military equipment, munitions, and advanced electronics in storage. Proper control helps prevent corrosion, degradation, and failures that can compromise operational readiness.

Prevention of rust

Protects vehicles, weapons, uniforms, and munitions from rust.

Ensures operational readiness

Controls humidity to preserve full operational capability, preventing corrosion and material failure that could hinder rapid deployment and performance in critical missions.

Electronics and systems protection

Maintains precise humidity levels to prevent microscopic corrosion and electrostatic discharge in sensitive communication, navigation, and control systems.

Humidity for military storage

Top of page Use cases FAQs

Dehumidification for military storage

In military storage facilities, sensitive equipment, vehicles, and ammunition are highly susceptible to corrosion, mould, and electronic failure caused by uncontrolled humidity levels.
By maintaining a constant, optimal humidity level, dehumidification prevents material degradation, extends the service life of assets, and reduces maintenance and replacement costs — ensuring operational readiness at all times.
Condair delivers proven dehumidification systems tailored to military storage environments worldwide. Trusted by armed forces and defence organisations, our solutions integrate advanced desiccant and condensation technologies that reduce corrosion-related damage by up to 70%, lower energy consumption, and safeguard valuable assets throughout their lifecycle.

Humidification for military storage

In dry or climate-controlled military storage environments, low humidity can cause shrinkage, cracking, and static buildup in sensitive materials such as rubber seals, textiles, electronic components, and weaponry.
Maintaining stable humidity levels prevents material degradation, preserves calibration accuracy of sensitive instruments, and minimises the risk of electrostatic discharge — ensuring equipment remains mission-ready and reliable.
Condair provides precision humidification systems engineered for defence storage applications worldwide. Our solutions deliver uniform humidity control, energy-efficient operation, and full integration into existing HVAC systems. Trusted by military organisations globally, Condair ensures optimal preservation conditions and long-term asset protection through every season.

Energy-efficient environmental control

Heating alone is often mistakenly used to reduce relative humidity but does not lower the absolute moisture in the air, leading to high running costs. Dehumidification directly removes water vapour, delivering up to 60% energy savings compared to heating-only strategies. This makes long-term preservation both cost-effective and sustainable.

Use cases

Frequently asked questions

What is the best type of dehumidifier for a military store?

"There are two main types of industrial dehumidifier - condensing and desiccant.

Condensing (refrigerant-based) dehumidifiers work well at higher temperature typically above 20°C. At lower temperatures the drying capacity is greatly reduced and below about 10°C they don’t work. They also will not generally provide humidity levels below 40-45%. They also require drainage for the condensate, so either a main drain or daily emptying of on-board tanks.

Desiccant dehumidifier systems offer a very flexible solution with a wider range of environmental conditions. They can dehumidify in temperatures typically from -30 to +40°C, together with ambient humidity from 0-100%RH, so are ideal for unheated defence storage facilities. Operationally they can take humidity levels below 10%RH if required with a control accuracy of +/-2%RH. They do not require water drainage connection but will need air ducting to exhaust the hot, wet air from the drying process."

What is the best type of humidifier for a military store?

"Electric steam humidifiers are frequently used in military storage facilities. There are two main types. Electrode boiler steam humidifiers, introducing steam directly to a room or an air duct, have a low capital cost, but can have high spares requirement and energy running costs. They offer a modulating output between 20 and 100% resulting in control accuracy of typically +/-7.5%.

A resistive steam humidifier can also deliver steam either directly to a room or via a ducted system. This type of humidifier has a higher capital cost but lower spares requirement. It has a fully modulating output, from 0-100%, resulting in a very close control accuracy of typically +/-2%RH."

What is the ideal humidity for military equipment storage?

Get free expert advice

If you want to explore your options for humidity control, Condair's expert sales engineers will visit your site, review your project and talk you through their recommendations.

Alternatively, if you would prefer a call or online meeting, our team are always happy to discuss possible solutions and offer free technical advice.

Talk to your local expert

Condair DA

Condair DA desiccant dryers are designed for applications requiring extremely low humidity, such as in sensitive industrial manufacturing processes, and for environments with very low temperatures or where precise moisture control is essential.

Condair DA

Get in touch with us

We look forward to receiving your message and your needs for Condair solutions.

Here you can obtain further information or contact your Condair representatives in your region directly.

Need more information or have a question?

Contact form

Contact a Condair consultant directly

Find the right Condair contact persons in your region

Contact your advisor